2017+ HONDA CIVIC (Si/LX/EX/Touring) / TYPE-R Cusco Parts List

Updated: May 25, 2018

2017+ HONDA CIVIC & Type-R Cusco Parts List

You asked for it! And it took us a while to collaborate with Honda, and figure out what and where we can enhance the fine-tuned character when used with higher grip tires and on a raceway specifically...
And here it is folks!
In addition to working with data Honda provided, we have toiled many kilometers in lapping various raceways of Japan and on canyon roads over and under Japan.  To tune it with our rally and track drivers and seek further enjoyment of Civic Type R's.
We sought to keep the excellent total balance of the car for use with more aggressive tire choices, and harder, faster end of performance threshold.
These parts are the results of Cusco's engineering team with long experience in racing since 1977.

Application For Honda Civic Type-R, FK8 chassis, 2017 K20C 

[Front Stabilizer Bar (Sway Bar) w/Bushings]

Solid 30mm 131% (vs. 29.2mm Hollow OE) increase in tornsional springrate over stock. 

***For Type-R only*** - Our test fit on Non Type-R is not performed yet. 

Part #: 3C4-311-A30
JAN Code: 4996338062420
MSRP: $427.00 USD

Tech Tip: To replace front sway bar, it requires to drop front sub-frame off to make space for removing OE and installing CUSCO Sway bar. Labor Time approx. 2.5H - 3H.

[Rear Stabilizer Bar (Sway Bar) w/Bushings & Brackets]

Solid 22mm 143% (vs. 20mm Solid OE) increase in torsional spring rate over stock.

***For Type-R and Other Civic models*** 

Part #: 3C4-311-B22
JAN Code: 4996338062437
MSRP: $374.00 USD

[Strut Tower Bar]
Addition precision to handling under loads, and keeping unibody structure pinned to reduce alignment changes, works best as a set with other braces and strut tower bar.

***For Type-R*** - "Curved" Bar Shape
*Designed for FK8 Civic Type R exclusively to clear the air duct under cover on hood. This product can be used for Non Type-R models, too.

Part #: 3C4-540-A
JAN Code: 4996338039248
MSRP: $200.00 USD

***For All Civic models except Type-R*** - "Straight" Bar Shape
*Designed for Non Type-R Civic models. Cannot be fit on Type-R model.

Part #: 3C3-540-A
JAN Code: 4996338039217
MSRP: $200.00 USD

[Front Power Brace]
Addition precision to handling under loads, and keeping unibody structure pinned to reduce alignment changes, works best as a set with other braces and strut tower bar.

***For Type-R only*** (Non Type-R model has reservoir tank and our bar hits to this tank) 

Part #: 3C4-492-F
JAN Code: 4996338048738
MSRP: $160.00 USD

[Center Power Brace]
Addition precision to handling under loads, and keeping unibody structure pinned to reduce alignment changes, works best as a set with other braces and strut tower bar.

***For Type-R***  Direct OE Replacement type

***For Non Type-R*** Require M12 x 1.25, L=25mm Flange Bolts (x 2 pcs.) separately from Honda dealer. Honda Genuine Part #: 90182-S2H-000

Part #: 3C4-492-C
JAN Code: 4996338048745
MSRP: $ 240.00 USD

[Rear Cross Member Power Brace]
Addition precision to handling under loads, and keeping unibody structure pinned to reduce alignment changes, works best as a set with other braces and strut tower bar.

***For Type-R only*** (Non Type-R model has different location of Exhaust Muffler Hangers and no clearance to go through) 

Part #: 3C4-492-RM
JAN Code: 4996338048752
MSRP: $ 240.00 USD

[Engine Pitch Stopper] 
Responsive engine and transmission link performance under loads of acceleration and deceleration, needed to cope with high grip and faster shifting, as well as reducing driveline slap upon clutch meets.

***Fits For All Civic models includes Type-R***

Part #: 3C4-911-PS
JAN Code: 4996338025302
MSRP: $267.00 USD

[Seat Rail / Floor Add-On Power Brace Set (Set of 2)]
Adding Torsional Rigidity to the Body/Floor to reduce body flex.

***For All Civic models includes Type-R***

Part #: 3C4-492-SP
JAN Code: 4996338048970
MSRP: $227.00 USD

***Note: Require to trim plastic cover as show in this picture.

[Limited Slip Differential (LSD)]

Reduction of free wheel spin over stock system, enhancing and customization of turn-in and exit attitude out of cornering, and straight line stability under load.
Complete details see http://lsd.cuscousainc.com

***For Type-R only***

CUSCO LSD Type-RS [Spec-F]
・Street/ Track Dual Use Tune for adaptability in daily use, and low traction conditions ・Milder actuation and ramp angle for more linear actuation and lower maximum LSD lock.
	Price		MSRP $1,840.00
1-Way 35° [1Way35°/1Way45°]	Part #	LSD-3A9-FT
	JAN Code	4996338102522
	LSD	Initial Torque Preset 2-4 kgfm /6 Springs (Max 12 Optional)
1-Way 35° [1Way35°/1.5Way50°-15°]	Part #	LSD-3A9-CT
	JAN Code	499633810292
	LSD	Initial Torque Preset 2-4 kgfm /6 Springs (Max 12 Optional)
1.5WAY 50°-15° [1WAY35°/1.5WAY55°/15°]	PART#	LSD-3A9-CT15
	JAN	4996338102508
	LSD	Initial Torque Preset 2-4 kgfm /6 Springs (Max 12 Optional)
		Honda Civic Type R	2017.11-
		FK8 (6MT)	FF/2.0L Turbo
		LSD type-RS/ Disk Plate Size：B
Optional / SST		Initial Torque Check Spline Tool (SST) LSD-SST-23, $100.00 ea. LSD Overhaul Kit:  LSD-001-31, $214.00